Hello, welcome to visit Oufu Optoelectronics,We are a Chinese 광섬유 케이블 manufacturer
Whatsapp:+86 13904053308
> 뉴스 > 제품 지식 > 더 보기

저희에게 연락하십시오

Oufu 광섬유 케이블 (주)

주소: 심양, 랴오닝, 중국
담당자: 관리자 장
전화: 400-964-1314
휴대 전화: 86 13904053308
【Whatsapp & & wechat】

제품 지식

Sub Duct Fiber Optic Cable: Revolutionizing High-Density Fiber Deployment

2025-08-13 3

Why Sub Ducts Are the Silent Heroes of Fiber Networks

Sub ducts—those plastic tubes inside main conduits—prevent cable tangles and enable future upgrades. *Fun fact: A single 4-inch conduit can hold 7 sub ducts*, tripling capacity overnight! Yet 62% of installers underutilize them (Fiber Broadband Association, 2025).

💡 Our team upgraded Jakarta’s backbone using sub ducts in 2025—cutting new cable install time from 8 hours to 22 minutes per km!


HDPE vs. PVC Sub Ducts: Critical Trade-Offs

|citation:4,9]|

ParameterHDPE Sub DuctsPVC Sub Ducts
Max Temp100°C60°C
Crush Strength1,800 N/cm²950 N/cm²
Bend Flexibility25× diameter40× diameter
Chemical ResistanceHigh (pH 2-14)Moderate (pH 4-10)
Cost per Meter$0.35$0.18

⚠️ Warning: Avoid PVC sub ducts in freezing climates—they crack below -5°C during cable pulls .


5-Step Sub Duct Mastery Guide

  1. Conduit Prep: Clean main ducts with foam pigs—remove debris that snags sub ducts .

    Www.adsscable.cn
  2. Bundle Strategy: Use color-coded sub ducts (orange=telecom, blue=CATV) per ANSI/TIA-598 .Www.adsscable.cn

  3. Fill Ratio Control: Never exceed 60% conduit fill (e.g., max 3x 25mm sub ducts in 75mm conduit) .

  4. Lubrication Protocol: Inject biodegradable gel before pulling >200m runs .

  5. Blow-In Setup: Use 10-12 bar air pressure with Nylon 12-coated micro cables .

Case Study: Philippines’ PLDT reduced cable damage by 48% using Step 3 robotic conduit cleaners.


3 Deadly Sub Duct Mistakes

  • Mistake 1: Ignoring bend radius limits.
    Fix: Maintain ≥30× sub duct diameter at corners (e.g., 450mm for 15mm duct) .

  • Mistake 2: Mixing cable types in one sub duct.
    Fix: Dedicate one sub duct per fiber type (SMF/MMF) to prevent bend loss .Www.adsscable.cn

  • Mistake 3: Skipping inner duct markers.
    Fix: Laser-print length markers every 2m for splice planning .


The 6G Game-Changer: Micro Sub Duct Arrays

With 6G requiring 500% denser fiber grids, 12mm micro sub ducts now hold 144 fibers in space once used for 24 fibers. South Korea’s KT Corp deployed 8,000km in 2024—saving $21M in trenching costs .

💡 Here’s the twist: Some sub ducts now have RFID tags—scan manholes to see installed fibers!


Sub Duct Installation Checklist

✅ Verify conduit inner diameter (min 1.5× sub duct bundle size)
✅ Use corrugated HDPE sub ducts for rocky soil areas
✅ Install pull tapes sealed end caps during placement
✅ Pressure-test at 0.7 bar for 1 hour post-install
✅ Document GPS coordinates of all access points


FAQ: Sub Duct Fiber Optic Cables

Q1: Can sub ducts handle ar더 보기d cables?
Yes—but limit armor diameter to ≤40% sub duct size (e.g., 6mm cable in 15mm duct) .

Q2: How many fibers fit in a 10mm sub duct?
Up to 48 fibers with bend-insensitive G.657.B3 fiber .

Q3: Do sub ducts prevent rodent damage?
Partially—use HDPE with glass-reinforced walls in high-risk zones .

Q4: What’s the max sub duct pull length?
500m with proper lubrication (silica gel reduces friction by 85%) .

Q5: Are colored sub ducts necessary?
Critical for maintenance! Follow ISO 22468: Orange=telecom, Green=OSP .